Item NO.:
S-89Application:
film surface matting printing inkSolid Content:
40%Clour:
Transparent or light yellowish liquidSolvent:
acetic ether/isopropyl alcoholDescription:
S-89 is a type modified alcohol-ester soluble hydroxyl polyurethane resin,which mix with Coverstro NCO hardener(3300,N75) to react,applied for OPP,PET matting inks.S-89 resin has excellent adhesion to untreated OPP and PET substrates, and adding curing agents can greatly improve scratch resistance and high temperature resistance on PET, but will reduce adhesion on OPP, so it is recommended not to add curing agents when used on OPP.
Application
Suitable for the application of film surface printing matting ink
Technical Data
Item |
S-89 |
Appearance |
Clear or light yellowish transparent liquid |
Solid Content (%) |
40±1 |
Viscosity(mPa·S(25℃)) |
500±300 |
Solvent |
EAc/IPA |
Safety Precaution
1.If the product is not used up after opening, please seal it immediately to prevent the solvent from evaporating.
2.Wear protective gloves and goggles during handling. If accidentally spilled into eyes, rinse with large amounts of water and seek medical attention immediately.
Storage
Suggesting sealed storage,far away from flame. Shelf life:12months
Package
180Kg、18Kg/Drum